Fusor Chamber

For posts specifically relating to fusor design, construction, and operation.
Post Reply
Pablo W
Posts: 10
Joined: Wed Dec 28, 2022 12:39 pm
Real name: Pablo W.

Fusor Chamber

Post by Pablo W »

Hey! I was wondering, what's the best way to make a spherical vacuum chamber, or where can I buy one? I am planning on making a fusor build and was wondering what the best way to go about this was. In terms of power supply, I am planning on using a neon transformer (and rectifier), and a voltage multiplier to step it up to a voltage high enough to fuse deuterium.

^^ I found this older post about the same topic, but the links are no longer valid: viewtopic.php?t=11526

I don't have good enough experience in metal work to fabricate my own.
Any help appreciated, thank you!
User avatar
Rich Feldman
Posts: 1470
Joined: Mon Dec 21, 2009 6:59 pm
Real name: Rich Feldman
Location: Santa Clara County, CA, USA

Re: Fusor Chamber

Post by Rich Feldman »

Welcome to the forum.
You can find answers by reading FAQs and searching the forum for a few hours.

Your question belongs in the New User Chat Area.

Also it's my turn to say: please change your username unless your real first name is Max and your real last name is Dogg. As required if you read the forum registration page.

Good luck.
Last edited by Rich Feldman on Wed Dec 28, 2022 1:16 pm, edited 1 time in total.
All models are wrong; some models are useful. -- George Box
Pablo W
Posts: 10
Joined: Wed Dec 28, 2022 12:39 pm
Real name: Pablo W.

Re: Fusor Chamber

Post by Pablo W »

Ok, thank you for the reply, I will change my username now!
User avatar
Paul_Schatzkin
Site Admin
Posts: 993
Joined: Thu Jun 14, 2001 12:49 pm
Real name: aka The Perfesser
Contact:

Re: Fusor Chamber

Post by Paul_Schatzkin »

Pablo W wrote: Wed Dec 28, 2022 1:16 pm Ok, thank you for the reply, I will change my username now!
Thank you for playing, but still wrong.

The registration requirement is "user ID must be full first and last name."

Kindly try again.

--P
Paul Schatzkin, aka "The Perfesser" – Founder and Host of Fusor.net
Author of The Boy Who Invented Television: 2023 Edition – https://amz.run/6ag1
"Fusion is not 20 years in the future; it is 60 years in the past and we missed it."
Post Reply

Return to “Fusor Construction & Operation (& FAQs)”