Say Hello to Everybody from my small room.
I'm Hieu Luu from Vietnam
I'm so glad I can write my first post here today
I researched, learned and gathered the necessary equipment for my first Fusor about 1 year ago. I started with backing pump, turbo pump, controller, diffusion pump, gauge, chamber, valve, feedthrough... just like that I was addicted...Currently I have results with UHV and can get -6 Torr.
My main job is in a car showroom. I deploy my Fusor alone and in a small room, outside of working hours.
I'm trying to keep learning and plan to run it later this year... when I'm ready.
I would like to update some pictures.
Glad to meet you all. Thanks you so much.
----------------------------------------
Hello to Everybody & Introduction
- russssellcrow
- Posts: 68
- Joined: Fri Dec 27, 2019 12:40 am
- Real name: Russell Crow
- Contact:
Re: Hello to Everybody & Introduction
Hi Hieu Luu,
Your English is fabulous, and your 1st test is spectacular! The hardest part for most Fusioneers is vacuum, and you hit it out of the park on your 1st attempt.
Congratulations, and welcome aboard.
Your English is fabulous, and your 1st test is spectacular! The hardest part for most Fusioneers is vacuum, and you hit it out of the park on your 1st attempt.
Congratulations, and welcome aboard.
Re: Hello to Everybody & Introduction
- I was quite nervous when the first tests, most of the parts, turbo pump, controler... I bought on ebay were in noted not-working condition... So the parts were very reasonably priced (within budget I can do )
- When everything worked properly, I breathed a sigh of relief and felt blessed.
- I will build the complete chamber, and test the vacuum again.
- When everything worked properly, I breathed a sigh of relief and felt blessed.
- I will build the complete chamber, and test the vacuum again.