Hello,
I'm looking for information about the detection of the TMP151 pump.
I suppose the detection method is the same as in TMP150 - resistor between pins 2 and 3 of the octal connector.
What is the value of this resistor for the TMP151? Maybe some of you have such a pump and could measure it?
Szymon
Leybold TMP151 pump select resistor
-
- Posts: 1
- Joined: Tue Nov 16, 2021 3:45 pm
- Real name: Szymon
- Location: Poland
- Dennis P Brown
- Posts: 3190
- Joined: Sun May 20, 2012 10:46 am
- Real name: Dennis Brown
Re: Leybold TMP151 pump select resistor
Hello'
we have a few minor rules for posting. First, we use full names and certainly no numbers are required yet. Next, a new person needs to post an introduction. Then feel free to ask questions here (as this part you have done.) These do take a few minutes but are worth the effort. People here at the forum tend to know a lot of things on various types of equipment so getting properly registered is worthwhile.
we have a few minor rules for posting. First, we use full names and certainly no numbers are required yet. Next, a new person needs to post an introduction. Then feel free to ask questions here (as this part you have done.) These do take a few minutes but are worth the effort. People here at the forum tend to know a lot of things on various types of equipment so getting properly registered is worthwhile.