I have used Ted Pella conductive graphite and silver products in my electrostatic work and experiments. I highly recommend them in a number of areas for the amateur experimenter where a simple low current, yet often high voltage conductor is needed. Obviously silver coating can handle a good deal more current due to it near zero resistance, but can really be expensive. Thankfully Pella knows this and sells in small quantities. If you make a boo-boo, simple isopropanol will wash your error away if you are using a graphite product. Note: if you use any of these painted-on materials, they will dry out like any paint product over years of storage so buy small and keep tightly sealed. Great stuff! They also offer aluminum oxide insulator paste and paints....Nickel conductive paints, etc. It is all offered in the sheet the URL below delivers.
https://www.tedpella.com/adhesive_html/ ... n.htm.aspx
Richard Hull
Base level source - conductive coatings & paints (graphite, silver)
-
Richard Hull
- Moderator
- Posts: 15416
- Joined: Fri Jun 15, 2001 9:44 am
- Real name: Richard Hull
Base level source - conductive coatings & paints (graphite, silver)
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
-
Richard Hull
- Moderator
- Posts: 15416
- Joined: Fri Jun 15, 2001 9:44 am
- Real name: Richard Hull
Re: Base level source - conductive coatings & paints (graphite, silver)
Resistive carbon inks to make low current high ohm resistive or resistor items.
http://www.creativematerials.com/produc ... fQQAvD_BwE
Data sheet 25k ohm/cm...
http://server.creativematerials.com/dat ... 101_80.pdf
Richard Hull
http://www.creativematerials.com/produc ... fQQAvD_BwE
Data sheet 25k ohm/cm...
http://server.creativematerials.com/dat ... 101_80.pdf
Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment