questions about vacume tech

Every fusor and fusion system seems to need a vacuum. This area is for detailed discussion of vacuum systems, materials, gauging, etc. related to fusor or fusion research.
Post Reply
seamus sullivan
Posts: 9
Joined: Sat Sep 28, 2019 5:15 pm
Real name: seamus

questions about vacume tech

Post by seamus sullivan » Thu Nov 21, 2019 6:27 pm

for a demo fusor do i need to buy a vacume chamber, or should i just use a vacume pump to sustain a vacume in a sealed container.
this is for ma demofusor, meaning i won't put duterium into this one. for duterium amature fusion, i know i should use a vacume chamber, but what aout demo.
thanks

User avatar
Richard Hull
Moderator
Posts: 11606
Joined: Fri Jun 15, 2001 1:44 pm
Real name: Richard Hull

Re: questions about vacume tech

Post by Richard Hull » Thu Nov 21, 2019 7:16 pm

The FAQs contain full information on making a demo fusor chamber or vessel. Their have been many forms used in the past. Check out the Images du jour forum.

Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
Retired now...Doing only what I want and not what I should...every day is a saturday.

ian_krase
Posts: 572
Joined: Mon Nov 28, 2016 7:48 am
Real name: Ian Krase

Re: questions about vacume tech

Post by ian_krase » Sat Nov 23, 2019 5:16 am

But that's exactly what a vacuum chamber is: a sealed container in which a vacuum is pulled using a vacuum pump.

Post Reply