Does anybody have any information on the company Vacuum General? In particular mass flow controller data sheets. I can't find a thing online.
Tom
Vacuum General Info
-
- Posts: 405
- Joined: Wed May 08, 2013 3:36 pm
- Real name: Tom McCarthy
- Location: Ireland
- Contact:
Re: Vacuum General Info
Vacuum General was acquired by Tylan (Tylan General), which was later acquired by Mykrolis. You might find info under the other company names. Which MFC do you need data for?
-
- Posts: 405
- Joined: Wed May 08, 2013 3:36 pm
- Real name: Tom McCarthy
- Location: Ireland
- Contact:
Re: Vacuum General Info
Cheers Jim - I'm looking for information on model FV6-11. Has a D-sub connector.
I'll have a look at Tylan/Millipore models wih d-sub connections, they may have inherited Vacuum General pinouts.
Tom
I'll have a look at Tylan/Millipore models wih d-sub connections, they may have inherited Vacuum General pinouts.
Tom
Re: Vacuum General Info
Tom, this image is reported to be of an FV6-41. https://www.artisantg.com/itemimages/VG ... _View3.jpg
Being from the same series, there's a good chance this is the same on yours. Maybe comparing some of the wiring inside would help confirm that.
Being from the same series, there's a good chance this is the same on yours. Maybe comparing some of the wiring inside would help confirm that.
-
- Posts: 405
- Joined: Wed May 08, 2013 3:36 pm
- Real name: Tom McCarthy
- Location: Ireland
- Contact:
Re: Vacuum General Info
Great, thanks for that. I've also got the seller to send me a copy of the pinout that he found and will compare. Betting they'll match.
Thanks Jim!
Tom
Thanks Jim!
Tom
- Richard Hull
- Moderator
- Posts: 15027
- Joined: Fri Jun 15, 2001 9:44 am
- Real name: Richard Hull
Re: Vacuum General Info
Question?
Why was this not in the vacuum forum?
This forum is for the originator of the first post to drop a useful file into that post.
No questioning posts should ever appear here.
I am the garbage man and will delete this entire thread soon
Richard Hull
Why was this not in the vacuum forum?
This forum is for the originator of the first post to drop a useful file into that post.
No questioning posts should ever appear here.
I am the garbage man and will delete this entire thread soon
Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
-
- Posts: 405
- Joined: Wed May 08, 2013 3:36 pm
- Real name: Tom McCarthy
- Location: Ireland
- Contact:
Re: Vacuum General Info
My bad. I thought it was appropriate as a data sheet/file was the desired response.
Tom
Tom