My fusion setup

Current images of fusor efforts, components, etc. Try to continuously update from your name, a current photo using edit function. Title post with your name once only. Change image and text as needed. See first posting for details.
steventw
Posts: 103
Joined: Fri Jan 24, 2014 8:45 am
Real name: Steven Whittam
Location: Melbourne/Australia

Re: My fusion setup

Post by steventw »

Hmm

Well the idea of ceramic coating isn’t new dad had idea few years back
Glass Probly not good for holding magnets in place
Unless had a glass ball with right pressure with hydrogen or mix of ideal fuel and 2 electrodes to sit in centre… random idea.

Ideally I would remake the square bracket that’s holding magnets and realign magents so there facing each other dead centre again. When was first made sat flush. But when had first accident with lid being sucked in, bent all outa shape
Older bro kinda fixed but not 100% accurate.

If new how to work with glass and get to pressure and the electrodes and gas maybe.
But would Probly melt if was working. So Probly need to be in vacuum chamber close to same pressure.

Ideally idea posted few posts back would be ideal in vacuum and if works as one would hope
Would just need to get going and feed now and again
steventw
Posts: 103
Joined: Fri Jan 24, 2014 8:45 am
Real name: Steven Whittam
Location: Melbourne/Australia

Re: My fusion setup

Post by steventw »

Picture from last night.
Got to 1000 micron in 3 minutes.
11th july. 2022
11th july. 2022
Post Reply

Return to “Images du Jour”