Hi everyone,
I have a chance to buy a machined ring cathode made of either SS or titanium. I have tried to look up whether or not titanium has any benefits, but only found some thought that it out-gasses…
Is there a definitive yay or nay to using titanium ring cathodes in a fusor? Or, should I go with SS?
-Matt
Titanium Cathode
-
- Posts: 501
- Joined: Thu Sep 23, 2021 10:36 am
- Real name: Matt Gibson
- Richard Hull
- Moderator
- Posts: 15024
- Joined: Fri Jun 15, 2001 9:44 am
- Real name: Richard Hull
Re: Titanium Cathode
Matt,
With 189 posts and a fusor, you need never post in the new user chat area ever again. Unless you like it here.
This kind of question belong in the Construction forum.
Titanium will absorb hydrogen/deuterium and can outgas in a fusor operation, but that is OK as we want a deuterium atmosphere. If it ougases deuterium during operation adjusting the D2 flow rate down should rebalance the pressure. It is all part of operating the system.
I would always go with the higher melting point item as long as the vapor pressure at red orange heat is lower than the 4-20 micron pressure of deuterium running pressure. All elements have a vapor pressure as their temperature goes up towards the melting point.
I will attempt to check this out.
Richard Hull
With 189 posts and a fusor, you need never post in the new user chat area ever again. Unless you like it here.
This kind of question belong in the Construction forum.
Titanium will absorb hydrogen/deuterium and can outgas in a fusor operation, but that is OK as we want a deuterium atmosphere. If it ougases deuterium during operation adjusting the D2 flow rate down should rebalance the pressure. It is all part of operating the system.
I would always go with the higher melting point item as long as the vapor pressure at red orange heat is lower than the 4-20 micron pressure of deuterium running pressure. All elements have a vapor pressure as their temperature goes up towards the melting point.
I will attempt to check this out.
Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
-
- Posts: 501
- Joined: Thu Sep 23, 2021 10:36 am
- Real name: Matt Gibson
Re: Titanium Cathode
I figured I’d post it here since I didn’t know how much is already known about the effects that deuterium had on titanium
I’ll startup a topic in the Construction area after I have done a little more experimenting.
-Matt
I’ll startup a topic in the Construction area after I have done a little more experimenting.
-Matt
Re: Titanium Cathode
We just made a new cathode using a titanium surgical rod from ebay, a titanium headset spacer for a bicycle, and some tig welding nozzles. We still haven't attained fusion, but it sure looks pretty. The most difficult aspect of ti is machining it. It will work-harden easily and is quite hard.