Leybold TMP151 pump select resistor

For Short Term Learning Discussions ONLY. This area is for CURSORY questions and connecting with other users ONLY. ALL technical contributions need to be made in the appropriate forums and NOT HERE. All posts are temporary and will be deleted within weeks or months. You should have already search the extensive FAQs in each of the forums before posting here as your question may already be answered.
Post Reply
Szymon Tetis
Posts: 1
Joined: Tue Nov 16, 2021 3:45 pm
Real name: Szymon
Location: Poland

Leybold TMP151 pump select resistor

Post by Szymon Tetis »

Hello,
I'm looking for information about the detection of the TMP151 pump.
I suppose the detection method is the same as in TMP150 - resistor between pins 2 and 3 of the octal connector.
What is the value of this resistor for the TMP151? Maybe some of you have such a pump and could measure it?

Szymon
User avatar
Dennis P Brown
Posts: 3159
Joined: Sun May 20, 2012 10:46 am
Real name: Dennis Brown

Re: Leybold TMP151 pump select resistor

Post by Dennis P Brown »

Hello'
we have a few minor rules for posting. First, we use full names and certainly no numbers are required yet. Next, a new person needs to post an introduction. Then feel free to ask questions here (as this part you have done.) These do take a few minutes but are worth the effort. People here at the forum tend to know a lot of things on various types of equipment so getting properly registered is worthwhile.
Post Reply

Return to “New User Chat Area”