Hello
I have a spellman high voltage power supply have a burnt transformer T3.
What is the solution and what id the reason
Best Regards
Spellman -40kV PTV power supply
Re: Spellman -40kV PTV power supply
Last edited by mircado on Sun May 30, 2021 4:10 pm, edited 1 time in total.
- Dennis P Brown
- Posts: 3189
- Joined: Sun May 20, 2012 10:46 am
- Real name: Dennis Brown
Re: Spellman -40kV PTV power supply
First, great post and work, Andrew!
Poster mircado - first, you need to fix your name, we use full names in all sections (yes, nick names are used by people in day-to-day activities but policy here we use full names). Second, using someone else's post to ask your own question is not the proper method (I understand the reason.) Rather, start your own post or send a PM to the poster.
Thanks and good luck with your efforts.
Poster mircado - first, you need to fix your name, we use full names in all sections (yes, nick names are used by people in day-to-day activities but policy here we use full names). Second, using someone else's post to ask your own question is not the proper method (I understand the reason.) Rather, start your own post or send a PM to the poster.
Thanks and good luck with your efforts.
-
- Posts: 810
- Joined: Sun Feb 01, 2004 8:02 pm
- Real name: Andrew Seltzman
- Contact:
Re: Spellman -40kV PTV power supply
My best guess is to try to find a similar surplus secondary and try to replace the burnt one, it would be pretty difficult to wind your own (though not impossible).
Also you posted about this in this thread in 2015, is this the same supply?
Also you posted about this in this thread in 2015, is this the same supply?
Andrew Seltzman
www.rtftechnologies.org
www.rtftechnologies.org
Re: Spellman -40kV PTV power supply
Thank you for your reply.
Yes it is the same, i change the complete unit before.
Now it is very difficult to change it again so i am searching for another solution
Yes it is the same, i change the complete unit before.
Now it is very difficult to change it again so i am searching for another solution