This is nothing new but I haven’t seen a post about it for awhile. If anything, it’ll serve as a good reminder to folks currently building their systems.
There is always valid concern about xrays leaking from the glass viewport. However, don’t forget about the ceramic feedthru. My 2.75” system is heavily shielded with 1/8” lead and the viewport / camera arrangement is totally encompassed as well.
I generally use a pancake detector for monitoring xrays near the operating position. After pushing the fusor past 27kV I began to notice some X-ray leakage below the fusor near the feedthru. It wasn’t much, but enough to shine a bit into the operator area. After sweeping the feedthru with the pancake, it was clear this was the 2nd “window” of concern.
I then built another shield (yellow X) that dropped X-ray levels to nothing. Affixed to the backside of the panel is a sheet of 1/8” lead.
Mark Rowley
XRays leaking from feedthru
- Mark Rowley
- Posts: 909
- Joined: Sun Dec 29, 2002 12:20 am
- Real name: Mark Rowley
- Location: Sacramento California
- Contact:
- Richard Hull
- Moderator
- Posts: 15027
- Joined: Fri Jun 15, 2001 9:44 am
- Real name: Richard Hull
Re: XRays leaking from feedthru
Yes I noticed this and posted on it back in the old songs and early intranet forums. I also include a segment in my second fusor video tape back in 2000 showing the x-ray blast exiting the insulator area. It is wise to never let the window or the insulator face outwards towards the operator or the viewing public. 1/8" lead shielding is more than adequate shielding for 95% of all fusors. The shadow cone shied I have mentioned in the FAQs is the simplest of all shields to employ for the operator. Catches all those pesky x-rays. see the old post. Note: I will now add a small graphic image of the shield to this old 2007 posting.
viewtopic.php?f=31&t=5783&p=34227#p34227
Richard Hull
viewtopic.php?f=31&t=5783&p=34227#p34227
Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment