Joe Gayo's lab tour

For posts specifically relating to fusor design, construction, and operation.
Post Reply
Joe Gayo
Posts: 190
Joined: Mon Jan 07, 2019 2:34 am
Real name: Joe Gayo
Location: Los Angeles, CA

Re: Joe Gayo's lab tour

Post by Joe Gayo » Sat Jul 27, 2019 2:39 am

Getting Serious ... added a turbo and RGA
IMG_2249.jpg
IMG_2250.jpg
Top
Joe Gayo
Posts: 190
Joined: Mon Jan 07, 2019 2:34 am
Real name: Joe Gayo
Location: Los Angeles, CA

Re: Joe Gayo's lab tour

Post by Joe Gayo » Sat Jul 27, 2019 11:45 pm

Initial Pump Down versus Base Pressure After Multiple Heating Cycles
Pressure (Torr).png
Before and After Run
Pressure (Torr) (1).png
Top
User avatar
Scott Moroch
Posts: 206
Joined: Thu Apr 26, 2012 12:48 am
Real name: Scott Moroch
Location: New Jersey

Re: Joe Gayo's lab tour

Post by Scott Moroch » Sat Jul 27, 2019 11:52 pm

Are you sure your units are right? I have never heard of anyone reaching 1E-10 with a turbo. Best I have seen is E-8. Perhaps someone with more experience can weigh in.

What are the time units? Minutes? Days?

Nice work though!

Scott
"In the middle of difficulty lies opportunity"
-Albert Einstein
Top
Joe Gayo
Posts: 190
Joined: Mon Jan 07, 2019 2:34 am
Real name: Joe Gayo
Location: Los Angeles, CA

Re: Joe Gayo's lab tour

Post by Joe Gayo » Sun Jul 28, 2019 12:16 am

The x-axis is AMU ... these are all single scans that take about 1 minute
Top
User avatar
Scott Moroch
Posts: 206
Joined: Thu Apr 26, 2012 12:48 am
Real name: Scott Moroch
Location: New Jersey

Re: Joe Gayo's lab tour

Post by Scott Moroch » Sun Jul 28, 2019 12:45 am

Ah, I see. I apologize, I misunderstood. Thought time was the x-axis . Nice plots.

Scott
"In the middle of difficulty lies opportunity"
-Albert Einstein
Top
User avatar
Richard Hull
Moderator
Posts: 12748
Joined: Fri Jun 15, 2001 1:44 pm
Real name: Richard Hull

Re: Joe Gayo's lab tour

Post by Richard Hull » Sun Jul 28, 2019 6:08 am

SRS! Top drawer stuff. I picked up a brand new, in-box SRS 0-3kv digital controlled PMT, Proportional tube power supply. List price $1900 at a hamfest for $250. Best supply I have ever seen. I powers my 5" Bicron NaI:Tl gamma spec tube into my canberra gamma spec. with it.

I have always lusted after an SRS RGA but lacked the $3000 to own a new one. But...who an I kidding... I would have to completely redo my system to hit 10e-6 torr.

Great system Joe ...

Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
Retired now...Doing only what I want and not what I should...every day is a saturday.
Top
ian_krase
Posts: 635
Joined: Mon Nov 28, 2016 7:48 am
Real name: Ian Krase

Re: Joe Gayo's lab tour

Post by ian_krase » Sun Jul 28, 2019 9:18 am

I actually wonder what the cheapest RGA out there is. It looks like many are available for a couple thousand...
Top
Joe Gayo
Posts: 190
Joined: Mon Jan 07, 2019 2:34 am
Real name: Joe Gayo
Location: Los Angeles, CA

Re: Joe Gayo's lab tour

Post by Joe Gayo » Sun Jul 28, 2019 4:35 pm

After a high power run, interesting peaks at 5 and 6 amu
Peaks5-11.png
Last edited by Joe Gayo on Mon Jul 29, 2019 12:39 am, edited 1 time in total.
Top
Joe Gayo
Posts: 190
Joined: Mon Jan 07, 2019 2:34 am
Real name: Joe Gayo
Location: Los Angeles, CA

Re: Joe Gayo's lab tour

Post by Joe Gayo » Mon Jul 29, 2019 12:27 am

More interesting data ... any guesses for amu 21 (DTO ?)
D2 Plasma Run - 90kV 15mA - 2.8mPa - 3.03E7 n_sec.png
Top
Dan Knapp
Posts: 364
Joined: Wed Aug 06, 2008 12:34 pm
Real name: Dan Knapp

Re: Joe Gayo's lab tour

Post by Dan Knapp » Mon Jul 29, 2019 2:34 am

D2OH+
Top
Post Reply

Return to “Fusor Construction & Operation (& FAQs)”