Hey need some advice
It’s not maken plasma like most fusors
Just arcing across grids
Any advice to fix this
Can attach photos when get home if needed
Arcing
-
- Posts: 574
- Joined: Sun Dec 30, 2012 3:39 am
- Real name:
- Location: San Jose CA
Re: Arcing
Steven,
I've seen some of your earlier posts and could never really understand what you are trying to do -- seems very different from what most others have done.
I think this type of question and discussion is more fitting for the New User Chat section until you get closer to some productive outcome.
I've seen some of your earlier posts and could never really understand what you are trying to do -- seems very different from what most others have done.
I think this type of question and discussion is more fitting for the New User Chat section until you get closer to some productive outcome.
Rex Allers
- Mark Rowley
- Posts: 909
- Joined: Sun Dec 29, 2002 12:20 am
- Real name: Mark Rowley
- Location: Sacramento California
- Contact:
Re: Arcing
Arcing across grids would indicate little to no vacuum in the chamber.
Pictures and full specs would be needed.
Mark Rowley
Pictures and full specs would be needed.
Mark Rowley
- Mark Rowley
- Posts: 909
- Joined: Sun Dec 29, 2002 12:20 am
- Real name: Mark Rowley
- Location: Sacramento California
- Contact:
Re: Arcing
Rex, just perused his earlier posts. Definitely not a fusor and I agree about it belonging in the new user chat room.
Steven, read up on other folks fusors and the FAQ's...specifically the vacuum and HV sections. It will really help accelerate your approach towards a basic vacuum chamber and safe plasma generation.
Mark Rowley
Steven, read up on other folks fusors and the FAQ's...specifically the vacuum and HV sections. It will really help accelerate your approach towards a basic vacuum chamber and safe plasma generation.
Mark Rowley