Neutron Claim

Current images of fusor efforts, components, etc. Try to continuously update from your name, a current photo using edit function. Title post with your name once only. Change image and text as needed. See first posting for details.
Post Reply
Sam_Samida-Pugh
Posts: 29
Joined: Thu Aug 11, 2016 1:09 am
Real name: Samuel Samida-Pugh

Neutron Claim

Post by Sam_Samida-Pugh » Sun Oct 15, 2017 4:28 am

Hello everyone, I am happy to say that on October 14th, I achieved fusion. I have been practicing operation with my deuterium system for about a month now as I had to wait for my bubble dosimeter to arrive and wanted to have some practice in for when I actually measured neutron radiation. I began this project last year when I was in grade 11 with the completion of my first demo fusor. One year later, I have finally completed my fusor at 17 during my grade 12 year.

Fusor Parts:
Transformer: 120kV X-Ray Transformer
Ballast: MOT
Rectifier: 2 40kV diodes 2 20kv diodes in series (120kV) for each winding
Voltage Control: 20 amp variac
Primary Pump: Robinair 15600 6CFM
Secondary Pump: Alcatel 5081 Turbo Pump
High Vacuum Gauge: Ionization Gauge
Deuterium System: PEM equipped with an over under pressure system, drierite and a needle valve.

Data:
Time of Operation: 7 minutes and 30 seconds (450 seconds)
Voltage: 26kV average
Current: 30mA average
D2 Pressure: 5-15 microns
Neutron Data:
Detector Type: BD-PND Bubble Dosimeter, 22 bubble/mrem sensitivity
Number of Bubbles: 8
Distance: 12" (30.48cm) from the center of the grid (9" from shell + 3" from shell to center of grid)

Calculations:
Flux: (3600/450) * 8 * (8/22) = 23.27n/cm2/s
Isotropic surface area: 3.14 * 4 * 30.48^2 = 11,668.62cm^2
Total Isotropic Emmision Rate: 23.27 * 11,668.62 = 271,528.83 n/s

Fusor Set Up:
IMG_4359.JPG
Fusor Set up
IMG_4360.JPG
Fusor Set up
Inner Grid:
FullSizeRender.jpg
Inner Grid
Detector:
Detecto.JPG
Detector
Me:
Fusor Shot1.JPG
The Fusor and I
Thanks to everyone who has provided insight along my fusor journey, I hope to continue working with my fusor and eventually conduct tests in the 50kV range.

User avatar
Richard Hull
Moderator
Posts: 11535
Joined: Fri Jun 15, 2001 1:44 pm
Real name: Richard Hull

Re: Neutron Claim

Post by Richard Hull » Sun Oct 15, 2017 4:46 am

Sam, I have entered your name in the Neutron Club listing.

You have done well and if you continue to work with your fusor, you will do much better.

Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
Retired now...Doing only what I want and not what I should...every day is a saturday.

Sam_Samida-Pugh
Posts: 29
Joined: Thu Aug 11, 2016 1:09 am
Real name: Samuel Samida-Pugh

Re: Neutron Claim

Post by Sam_Samida-Pugh » Sun Oct 15, 2017 5:25 am

Thank you, Mr. Hull.

User avatar
Dennis P Brown
Posts: 1714
Joined: Sun May 20, 2012 2:46 pm
Real name: Dennis P Brown
Location: Glen Arm, MD

Re: Neutron Claim

Post by Dennis P Brown » Sun Oct 15, 2017 2:04 pm

Congratulations for the good work and getting in the neutron club!

Sam_Samida-Pugh
Posts: 29
Joined: Thu Aug 11, 2016 1:09 am
Real name: Samuel Samida-Pugh

Re: Neutron Claim

Post by Sam_Samida-Pugh » Wed Oct 18, 2017 4:39 pm

Thanks, Dennis.

Post Reply