Negative and Positive Charges

This forum is for specialized infomation important to the construction and safe operation of the high voltage electrical supplies and related circuitry needed for fusor operation.
Post Reply
Aidan Kehoe
Posts: 12
Joined: Thu Feb 06, 2014 4:30 pm
Real name: Aidan Kehoe

Negative and Positive Charges

Post by Aidan Kehoe »

For a real fusor, the chamber should be positively charged using a ballast resistor and the inner grid should be negative using a feedthrough right?
Thanks,
Aidan
Tom McCarthy
Posts: 405
Joined: Wed May 08, 2013 3:36 pm
Real name: Tom McCarthy
Location: Ireland
Contact:

Re: Negative and Positive Charges

Post by Tom McCarthy »

Aidan,

Please read the FAQs.
Sorry for the curt nature of my answer, I'm on a mobile and it's hard to type an explanation to your question.

Tom
Aidan Kehoe
Posts: 12
Joined: Thu Feb 06, 2014 4:30 pm
Real name: Aidan Kehoe

Re: Negative and Positive Charges

Post by Aidan Kehoe »

Okay, I will. Sorry but I didn't know there was an FAQ section besides for the account (I'm new to this site). I found it now, though, so I will refer to it.
Aidan
Post Reply

Return to “High Voltage - Fusor Input Power (& FAQs)”