Diff pump first looks

Every fusor and fusion system seems to need a vacuum. This area is for detailed discussion of vacuum systems, materials, gauging, etc. related to fusor or fusion research.
Post Reply
User avatar
Andrew Robinson
Moderator
Posts: 688
Joined: Sun Aug 11, 2013 1:54 am
Real name: Andrew Robinson
Location: Raleigh, North Carolina
Contact:

Diff pump first looks

Post by Andrew Robinson »

Diff pump
Diff pump
Doing first inspections of the new diff pump and discovered the following
Bottom of tree
Bottom of tree
Is this brilo type material in the bottom of the tree common/intentional?

Thank you
I can wire anything directly into anything! I'm the professor!
User avatar
Carl Willis
Posts: 2841
Joined: Thu Jul 26, 2001 7:33 pm
Real name: Carl Willis
Location: Albuquerque, New Mexico, USA
Contact:

Re: Diff pump first looks

Post by Carl Willis »

Hi Andrew,

The Brillo is intentional (it provides surface on which to nucleate evaporation of oil).

-Carl
Carl Willis
http://carlwillis.wordpress.com/
TEL: +1-505-412-3277
User avatar
Andrew Robinson
Moderator
Posts: 688
Joined: Sun Aug 11, 2013 1:54 am
Real name: Andrew Robinson
Location: Raleigh, North Carolina
Contact:

Re: Diff pump first looks

Post by Andrew Robinson »

That's exactly what I was predicting woot.

It looks to be a little worn and sparse in some areas. I have no idea the age of this pump. Recommendations on replacement if necessary?

Thanks for the help!
Last edited by Andrew Robinson on Tue Sep 03, 2013 8:38 pm, edited 1 time in total.
I can wire anything directly into anything! I'm the professor!
User avatar
Andrew Robinson
Moderator
Posts: 688
Joined: Sun Aug 11, 2013 1:54 am
Real name: Andrew Robinson
Location: Raleigh, North Carolina
Contact:

Re: Diff pump first looks

Post by Andrew Robinson »

Ha just noticed you're from the Q! Did my nuke degree out in Albuquerque at UNM. Love New Mexico! Will you be attending HEAS?
I can wire anything directly into anything! I'm the professor!
User avatar
Carl Willis
Posts: 2841
Joined: Thu Jul 26, 2001 7:33 pm
Real name: Carl Willis
Location: Albuquerque, New Mexico, USA
Contact:

Re: Diff pump first looks

Post by Carl Willis »

I will be at HEAS.

Indeed I am a Burqueño at the moment and plan on sticking around. UNM has an interesting NE program, complete with the unique little 6-watt plastic nuclear reactor. Did you get to operate it at all? I work and live about a mile from main campus. If you come back this way, I have a guest bedroom.

Anyway, about the diff pump, I would do nothing else to it. Maybe wash with some Brakleen if it has obvious deposits from cracked oil, but otherwise forget it and just put it in service. Very little can go wrong with this pump.

-Carl
Carl Willis
http://carlwillis.wordpress.com/
TEL: +1-505-412-3277
User avatar
Andrew Robinson
Moderator
Posts: 688
Joined: Sun Aug 11, 2013 1:54 am
Real name: Andrew Robinson
Location: Raleigh, North Carolina
Contact:

Re: Diff pump first looks

Post by Andrew Robinson »

Carl Willis wrote:I will be at HEAS.
Excellent, I look forward to meeting you in person.
Carl Willis wrote:UNM has an interesting NE program, complete with the unique little 6-watt plastic nuclear reactor. Did you get to operate it at all?
Haha, interesting... Yes you can say that again... Complete with plastic reactor (PERFECT DESCRIPTION LOL) and an ominous looking cobalt chamber where we stored a couch... Yes... A couch... Obviously poorly funded. Professors were great though. And yes, I spent most of my days in the lab and got some time on the reactor. Since the NE program was so small (All my classes had about the same 5 - 10 people) we all spent most of our time in the "lounge" of the lab working.
Carl Willis wrote: I work and live about a mile from main campus. If you come back this way, I have a guest bedroom.
Excellent! Thank you for the offer. I'm in and out of ABQ occasionally. I still have lots of friends out that way and try to visit as often as I can.
Carl Willis wrote:Anyway, about the diff pump, I would do nothing else to it. Maybe wash with some Brakleen if it has obvious deposits from cracked oil, but otherwise forget it and just put it in service. Very little can go wrong with this pump.
Ok excellent, I will clean it up and install. Thanks for the advice.
I can wire anything directly into anything! I'm the professor!
User avatar
Richard Hull
Moderator
Posts: 14992
Joined: Fri Jun 15, 2001 9:44 am
Real name: Richard Hull

Re: Diff pump first looks

Post by Richard Hull »

BrakeKleen is good stuff, but I would follow it up with a long soak in acetone. Find a good sealable contianer and let the item soak for about 2 days. Diff pumps, as Carl notes, are pretty bullet proof with zero moving parts there is just nothing to go wrong beyond a burned out heater coil and they are user replacable in most instances.

Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
User avatar
Andrew Robinson
Moderator
Posts: 688
Joined: Sun Aug 11, 2013 1:54 am
Real name: Andrew Robinson
Location: Raleigh, North Carolina
Contact:

Re: Diff pump first looks

Post by Andrew Robinson »

Richard Hull wrote:I would follow it up with a long soak in acetone
Yup I agree, that's the way to go for anything you want super clean. I love acetone. Will be sure to give it a good soak and leave it there till ready to install.
Richard Hull wrote: Diff pumps, as Carl notes, are pretty bullet proof with zero moving parts there is just nothing to go wrong beyond a burned out heater coil and they are user replacable in most instances.
Yeah, after seeing my first one now in person, I even considered building my own haha. Very simple concept. I wont be, but it was a fun concept for a few seconds. Although, it would make mating the diffpump to the chamber VERY easy. Maybe it is time to do some experimentation and break out the Solidworks and CNC lathes :)

I could even go as far as doing a full thermal analysis on the part.

Maybe I could get into the business of building custom diff pumps for fusors haha. Just kidding.

Thanks for the feedback.
I can wire anything directly into anything! I'm the professor!
Post Reply

Return to “Vacuum Technology (& FAQs)”