Archived - Cylindrical Fusor

Current images of fusor efforts, components, etc. Try to continuously update from your name, a current photo using edit function. Title post with your name once only. Change image and text as needed. See first posting for details.
Post Reply
User avatar
Mike Veldman
Posts: 157
Joined: Mon Aug 13, 2001 8:38 pm
Real name: Mike Veldman
Location: Stillwater, Oklahoma

Archived - Cylindrical Fusor

Post by Mike Veldman » Mon Apr 19, 2004 2:53 pm

These are some pictures of my current work in progress. This is just mocked up for the photos. This one is being created out of a pipe section I picked up at the recycling center a while back. The front view shows the shop made end piece and view port. The rear view shows the vacuum valve, sparkplug feedthrough, bleed valve and thermocouple. Another view is the entire chamber and also the inside of the backplate showing the grid and support. The final picture is the vacuum stand which is nearly complete for these deeper vacuum projects. The stand consists of a welch 1400 series fore pump, edwards diffusion pump with both water and forced air cooling, valving , gauging and column. This is built of pieces obtained here and there.
vss2.jpg (31.47 KiB) Viewed 1043 times
nfs17.jpg (27.67 KiB) Viewed 1043 times
nfs16.jpg (27.04 KiB) Viewed 1043 times
nfs15.jpg (22.69 KiB) Viewed 1043 times
nfs14.jpg (28.69 KiB) Viewed 1043 times
I tried to contain myself, but I escaped.

User avatar
Adam Szendrey
Posts: 1333
Joined: Fri Mar 29, 2002 10:36 pm
Real name: Adam Szendrey
Location: Budapest, Hungary

Re: Cylindrical Fusor

Post by Adam Szendrey » Mon Apr 19, 2004 3:07 pm

Mike, you have some "fusoring" going on there i see, making all these fusors :).


Post Reply