Plasma achieved!
- Cesare_Mencarini
- Posts: 34
- Joined: Fri Nov 25, 2022 7:23 am
- Real name: Cesare Mencarini
Re: Plasma achieved!
It's been a while since I last posted on the forum—I’ve been caught up with exam season and working towards my A-Level certifications. Despite my busy schedule, I’ve managed to dedicate most of my free time to the fusor project. However, I regret to inform you all that I still haven't achieved fusion yet.
The setup is nearly complete, with only the power supply missing. I previously mentioned a Japanese power supply that seemed promising, but unfortunately, it turned out to be less viable than I had hoped. Not only was it custom-made with cables costing over £700, but it also struggled to reach the 1mA mark. Nevertheless, I did manage to mount a Japanese-to-UK voltage converter, and it powered on successfully.
When I have more time, I’ll be focusing on either sourcing a new power supply or creating a custom cable for the existing one.
As for the Neutron / Plasma Club, I haven't applied yet, even though I achieved plasma a while back.
On a different note, I’m surprised that Paul found that article before I did. Thanks for sharing it with me!
The setup is nearly complete, with only the power supply missing. I previously mentioned a Japanese power supply that seemed promising, but unfortunately, it turned out to be less viable than I had hoped. Not only was it custom-made with cables costing over £700, but it also struggled to reach the 1mA mark. Nevertheless, I did manage to mount a Japanese-to-UK voltage converter, and it powered on successfully.
When I have more time, I’ll be focusing on either sourcing a new power supply or creating a custom cable for the existing one.
As for the Neutron / Plasma Club, I haven't applied yet, even though I achieved plasma a while back.
On a different note, I’m surprised that Paul found that article before I did. Thanks for sharing it with me!
- Richard Hull
- Moderator
- Posts: 15290
- Joined: Fri Jun 15, 2001 9:44 am
- Real name: Richard Hull
Re: Plasma achieved!
All the best on securing a viable poser supply needed to do fusion. This is always a hard item to either build or purchase.
Richard Hull
Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
- Paul_Schatzkin
- Site Admin
- Posts: 1105
- Joined: Thu Jun 14, 2001 12:49 pm
- Real name: aka The Perfesser
- Contact:
This Story Made NPR
.
I was amused to hear this morning that the story Cesare's science fair project made it to Wait Wait Don't Tell Me - The NPR News Quiz as one of the final questions in the 'Lightning Round" at the end of the show.
Here's the audio from that one segment:
. .
And a link to the entire show's podcast:
.
https://podcasts.apple.com/us/podcast/w ... 0667558504
.
I did not know that other parents had object to Cesare's presentation on the grounds that a 'nuclear reactor' is too complicated for a student to assemble. Little do they know...
--PS
I was amused to hear this morning that the story Cesare's science fair project made it to Wait Wait Don't Tell Me - The NPR News Quiz as one of the final questions in the 'Lightning Round" at the end of the show.
Here's the audio from that one segment:
. .
And a link to the entire show's podcast:
.
https://podcasts.apple.com/us/podcast/w ... 0667558504
.
I did not know that other parents had object to Cesare's presentation on the grounds that a 'nuclear reactor' is too complicated for a student to assemble. Little do they know...
--PS
Paul Schatzkin, aka "The Perfesser" – Founder and Host of Fusor.net
Author of The Boy Who Invented Television
"Fusion is not 20 years in the future; it is 60 years in the past and we missed it."
Author of The Boy Who Invented Television
"Fusion is not 20 years in the future; it is 60 years in the past and we missed it."
- Cesare_Mencarini
- Posts: 34
- Joined: Fri Nov 25, 2022 7:23 am
- Real name: Cesare Mencarini
Re: Plasma achieved!
Thank you for sharing this, Paul! I was expecting some news coverage, but I never imagined I’d make it onto a News Quiz. That’s definitely a nice surprise!
- Paul_Schatzkin
- Site Admin
- Posts: 1105
- Joined: Thu Jun 14, 2001 12:49 pm
- Real name: aka The Perfesser
- Contact:
Re: Plasma achieved!
Well the least they coulda done would be to mention your actual name.Cesare_Mencarini wrote: ↑Sun Sep 01, 2024 3:25 pm Thank you for sharing this, Paul! I was expecting some news coverage, but I never imagined I’d make it onto a News Quiz. That’s definitely a nice surprise!
It's hard to get famous - or notorious - if nobody knows you name!
--PS
Paul Schatzkin, aka "The Perfesser" – Founder and Host of Fusor.net
Author of The Boy Who Invented Television
"Fusion is not 20 years in the future; it is 60 years in the past and we missed it."
Author of The Boy Who Invented Television
"Fusion is not 20 years in the future; it is 60 years in the past and we missed it."
- Cesare_Mencarini
- Posts: 34
- Joined: Fri Nov 25, 2022 7:23 am
- Real name: Cesare Mencarini
Re: Plasma achieved!
That’s true, but I suppose it’s the thought that counts. I’ve already received a lot of support, and at 17, I have plenty of time to make a name for myself. Thanks again for the resources!Paul_Schatzkin wrote: ↑Sun Sep 01, 2024 3:28 pm
Well the least they coulda done would be to mention your actual name.
It's hard to get famous - or notorious - if nobody knows you name!
--PS
- Dennis P Brown
- Posts: 3499
- Joined: Sun May 20, 2012 10:46 am
- Real name: Dennis Brown
Re: Plasma achieved!
Good work but no need to copy and repost people's comments* - thanks. Good luck on getting 'famous' in future work, too.
* Mr. Fusion owns and operates this site and as such, his use is certainly allowed
* Mr. Fusion owns and operates this site and as such, his use is certainly allowed
Ignorance is what we all experience until we make an effort to learn
- Paul_Schatzkin
- Site Admin
- Posts: 1105
- Joined: Thu Jun 14, 2001 12:49 pm
- Real name: aka The Perfesser
- Contact:
Now It's Made Colbert!
.
I just uploaded this segment from last night's Late Night with Stephen Colbert where he has some fun with Cesare's fusor:
https://youtu.be/C2ff5d3c-T8
After saying that "plasma was achieved in less than four weeks" (take that, ITER!), he goes on to ask, "should this be happening?"
To which I have offered an emphatic YES.
Again, it would be nice if the coverage was not so anonymous, but on the other hand, maybe there is something to be said for staying under the radar.
I just uploaded this segment from last night's Late Night with Stephen Colbert where he has some fun with Cesare's fusor:
https://youtu.be/C2ff5d3c-T8
After saying that "plasma was achieved in less than four weeks" (take that, ITER!), he goes on to ask, "should this be happening?"
To which I have offered an emphatic YES.
Again, it would be nice if the coverage was not so anonymous, but on the other hand, maybe there is something to be said for staying under the radar.
Paul Schatzkin, aka "The Perfesser" – Founder and Host of Fusor.net
Author of The Boy Who Invented Television
"Fusion is not 20 years in the future; it is 60 years in the past and we missed it."
Author of The Boy Who Invented Television
"Fusion is not 20 years in the future; it is 60 years in the past and we missed it."
- Richard Hull
- Moderator
- Posts: 15290
- Joined: Fri Jun 15, 2001 9:44 am
- Real name: Richard Hull
Re: Plasma achieved!
I really enjoyed the small piece, Paul. It shows how the common man mistrusts and doesn't really understand much in physics.
Fusion needs plasma...Even the great unwashed know that. They also know fusion is nuclear energy and that only the governments of nations should be messing with anything nuclear and many do not even trust that!
A kid or youth working with plasma seems out of place. They don't know that the local "Joe's bar and grill" neon sign works off plasma.
What can you do? You can't really educate them as it would confuse them and that makes their head hurt.
Richard Hull
Fusion needs plasma...Even the great unwashed know that. They also know fusion is nuclear energy and that only the governments of nations should be messing with anything nuclear and many do not even trust that!
A kid or youth working with plasma seems out of place. They don't know that the local "Joe's bar and grill" neon sign works off plasma.
What can you do? You can't really educate them as it would confuse them and that makes their head hurt.
Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
- Dennis P Brown
- Posts: 3499
- Joined: Sun May 20, 2012 10:46 am
- Real name: Dennis Brown
Re: Plasma achieved!
When you mention that when it comes to nuclear many people have trust issues. Kinda don't blame them. So much confused information and the fact that governments tend to spin anything into "don't worry" far too often, even when it happens to be bad. Still, a lot of harm can be done when the public does get wrong information from the people with an agenda that runs counter to all of our best interests. So, trying to get facts out there is all we can do. Your posting and this forum certainly is part of that effort.
So even through some people think the Earth is flat, some do a lot of research trying to support that idea; too bad most are only in it for the money but some certainly do try and that is not a bad thing. People do need to prove stuff for themselves - just have to learn to accept it when the data say's their idea doesn't hold up. That is the real challenge for anyone in science.
So even through some people think the Earth is flat, some do a lot of research trying to support that idea; too bad most are only in it for the money but some certainly do try and that is not a bad thing. People do need to prove stuff for themselves - just have to learn to accept it when the data say's their idea doesn't hold up. That is the real challenge for anyone in science.
Ignorance is what we all experience until we make an effort to learn
- Cesare_Mencarini
- Posts: 34
- Joined: Fri Nov 25, 2022 7:23 am
- Real name: Cesare Mencarini
Re: Now It's Made Colbert!
I haven't been very active in the past couple of weeks and just got on today. I saw the most recent post from Paul and must admit that that is not me . That guy made his using AI and asked it (I'm guessing GPT but not sure) how to build one. I don't know the specifics but I'm pretty sure that is the basic story. Thanks for sharing the clip though.
-
- Posts: 485
- Joined: Tue Jul 20, 2010 4:08 pm
- Real name: Joe Ballantyne
- Location: Redmond, WA
Re: Plasma achieved!
It was Hudhayfa. And actually he got a lot of help from Aidan Lee-Calamera who built a demo fusor and showed it off at an expo in the bay area earlier this summer. I suspect Hudhayfa saw Aidan's fusor and decided to build one too.
I suspect there was a lot more useful information transmitted from actual human intelligence, than AI. But involving AI generates more buzz.
See viewtopic.php?p=103314#p103314
Joe.
I suspect there was a lot more useful information transmitted from actual human intelligence, than AI. But involving AI generates more buzz.
See viewtopic.php?p=103314#p103314
Joe.