One more cube fusor

For posts specifically relating to fusor design, construction, and operation.
Post Reply
User avatar
Richard Hull
Moderator
Posts: 14992
Joined: Fri Jun 15, 2001 9:44 am
Real name: Richard Hull

Re: One more cube fusor

Post by Richard Hull »

I had no direct experience with turbos until Fusor V, but do have experience with gyroscopes of some size. I bolted the living hell out of my little turbo to the rigid fusor table which is bolted to the wall of the building with the side wall bolted into the concrete floor with poured molten lead anchor bolts. Certainly over kill, but I don't worry about the turbo torqueing around.

Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
User avatar
Finn Hammer
Posts: 298
Joined: Sat Mar 05, 2016 7:21 am
Real name: Finn Hammer
Contact:

Re: One more cube fusor

Post by Finn Hammer »

All,

After I realized that the frame had to be closed on all sides, and a additional post for the other side of the turbo, everything got rock solid, and the turbo spins up without any problems.
firstlook.jpg
I will move over to Images du Jour from now on, since things are getting very basic.

Cheers, Finn Hammer
Post Reply

Return to “Fusor Construction & Operation (& FAQs)”