"Let the experiment be done" Benjamin Franklin
Richard Hull
Fusor 2020
- Richard Hull
- Moderator
- Posts: 15032
- Joined: Fri Jun 15, 2001 9:44 am
- Real name: Richard Hull
Re: Fusor 2020
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
- Mark Rowley
- Posts: 909
- Joined: Sun Dec 29, 2002 12:20 am
- Real name: Mark Rowley
- Location: Sacramento California
- Contact:
Re: Fusor 2020
Jim, definitely going small. The furnace will only host a maximum size of 15x40mm. I’ll be using 0.203mm sheet and each target will probably be 15mm sq, possibly smaller. Installation will utilize a simple slide-in low profile aluminum sleeve (or similar).
First run will probably utilize a single target. If it works, one would be sufficient to identify any positive results.
Mark Rowley
First run will probably utilize a single target. If it works, one would be sufficient to identify any positive results.
Mark Rowley
- Tonya Fisher
- Posts: 3
- Joined: Wed Aug 25, 2021 4:49 pm
- Real name: Tonya Fisher
Re: Fusor 2020
Hello, I'm thinking about making fusor at home like a student project, so could you help me a littleฅ^•ﻌ•^ฅ Could you tell what hight-voltage environment you used and send a paper plan of the fuser. And how do you regularl gas pressure? Sorry for stupid questions (they can be for professional) and my English (it's yep not the second my language). Best wishes, Tonya
- Dennis P Brown
- Posts: 3189
- Joined: Sun May 20, 2012 10:46 am
- Real name: Dennis Brown
Re: Fusor 2020
Tonya, you did an intro and have followed all the rules. But its best to create your own thread to ask such a question and not use someone else's topic thread for that purpose. Also, read the FAQ's before asking questions since most answers are to be found there.
- Tonya Fisher
- Posts: 3
- Joined: Wed Aug 25, 2021 4:49 pm
- Real name: Tonya Fisher
Re: Fusor 2020
Oh, I did that before reading FAQ. I m sorry I haven't read the rules that time. So, now I have basic information about fusors. Thank you