Hi everyone,
I decided to use tungsten wire to make fusor's grid. For the first time, I bought tungsten wire with a radius of 0.2mm. It's too thin. The second time I bought a tungsten wire with a radius of 2 mm, it was too thick. So what radius of tungsten wire is suitable?
What's the suitable radius for tungsten filament in making grids?
-
Jiashen Chen
- Posts: 2
- Joined: Fri Aug 30, 2019 11:59 pm
- Real name: Jiashen Chen
-
Rich Feldman
- Posts: 1471
- Joined: Mon Dec 21, 2009 6:59 pm
- Real name: Rich Feldman
- Location: Santa Clara County, CA, USA
Re: What's the suitable radius for tungsten filament in making grids?
This belongs in New User Chat area.
Why do you think 0.2 mm wire is too thin?
Why do you think 2.0 mm wire is too thick?
Why do you think 2.0 mm wire is too thick?
All models are wrong; some models are useful. -- George Box
-
Rex Allers
- Posts: 574
- Joined: Sun Dec 30, 2012 3:39 am
- Real name:
- Location: San Jose CA
Re: What's the suitable radius for tungsten filament in making grids?
Agreed that this should be in "New User Chat" section.
Jiashen,
You also didn't follow the rules you agreed to when registering.
As in the Rules section here:
viewtopic.php?f=47&t=10508#p69690
"2) New members are required to introduce themselves in the "Please Introduce Yourself" forum prior to posting elsewhere on the site."
Please make that introduce post now.
Jiashen,
You also didn't follow the rules you agreed to when registering.
As in the Rules section here:
viewtopic.php?f=47&t=10508#p69690
"2) New members are required to introduce themselves in the "Please Introduce Yourself" forum prior to posting elsewhere on the site."
Please make that introduce post now.
Rex Allers