Where to begin?
Where to begin?
Hello fusor.net community im a newbie here. I've been interested in nuclear for a few years and kept leaning as much as i can. Now i have some of the required funding thanks to my school and i want to build a not-demonstration fusor. I've been surfing all over the internet and couldn't find any well explained resources about fusors. I believe this forum can guide me and help me on my journey of building a nuclear fusor. Thanks for reading.
- Finn Hammer
- Posts: 298
- Joined: Sat Mar 05, 2016 7:21 am
- Real name: Finn Hammer
- Contact:
Re: Where to begin?
Welcome here, and since you ask, you really should have
Posted this introduction in the forum designated for that. You must comply with the rule: full name, no handles.
Other than that, start reading the faq and the building threads.
This forum contains the recipy for success, if you care to dig it out.
Cheers, Finn Hammer
Posted this introduction in the forum designated for that. You must comply with the rule: full name, no handles.
Other than that, start reading the faq and the building threads.
This forum contains the recipy for success, if you care to dig it out.
Cheers, Finn Hammer
- Dennis P Brown
- Posts: 3184
- Joined: Sun May 20, 2012 10:46 am
- Real name: Dennis Brown
Re: Where to begin?
Finn said pretty much everything and all I'll add is - welcome and hope you get a good start on your build.