Plasma club criteria
-
- Posts: 40
- Joined: Sat May 29, 2021 12:24 pm
- Real name: Gunnar Mein
- Location: Kirland, WA
Plasma club criteria
Let’s ask here then - can someone clarify the criteria for plasma containment for acceptance in the plasma club? As in “visible plasma must be contained in grid” or “if if glows, it’s good”? Thanks!
- Dennis P Brown
- Posts: 3189
- Joined: Sun May 20, 2012 10:46 am
- Real name: Dennis Brown
Re: Plasma club criteria
Hello; one must meet (via photo proof and/or posts of construction details and images of the full device in the proper forum section via a new topic thread) that all required criteria have been meet. A simple image of a plasma in a grid is just one of the criteria on that list.
-
- Posts: 40
- Joined: Sat May 29, 2021 12:24 pm
- Real name: Gunnar Mein
- Location: Kirland, WA
Re: Plasma club criteria
Thank you. I am asking about this specific part of the set of criteria. I don’t need to post 8 minutes of video if we fail that.
- Ed Meserve
- Posts: 74
- Joined: Wed Oct 19, 2011 4:51 pm
- Real name: Ed Meserve
- Location: Maine, USA
Re: Plasma club criteria
Gunnar,
The "plasma containment in a grid" speaks to construction method. Most Demo Fusors will have a grid construction and the plasma will be located inside it.
The real criteria is a photo graphic record of construction and operation, along with measurements of critical values ( Grid Voltage and Current, vaccum pressure).
Here's a link to my submission to the Plasma Club for reference: viewtopic.php?f=18&t=13827&p=90178#p90178
Regards,
Ed
The "plasma containment in a grid" speaks to construction method. Most Demo Fusors will have a grid construction and the plasma will be located inside it.
The real criteria is a photo graphic record of construction and operation, along with measurements of critical values ( Grid Voltage and Current, vaccum pressure).
Here's a link to my submission to the Plasma Club for reference: viewtopic.php?f=18&t=13827&p=90178#p90178
Regards,
Ed
Ed Meserve
-
- Posts: 40
- Joined: Sat May 29, 2021 12:24 pm
- Real name: Gunnar Mein
- Location: Kirland, WA
Re: Plasma club criteria
Thanks Ed, we'll go through with it then.