Page 1 of 1

[Request] Needle Valve

Posted: Thu Apr 11, 2019 12:40 pm
by The Super Nerds Team
Hello all,

We are building a fusor reactor and were looking for a fine, high vacuum needle valve for our deuterium system. We need something that can control a flow rate of about 0-1000 sccm. Additionally, our copper tube leading in and out of the needle valve will have an outer diameter of 1/8". If anyone has information on a product like this for less than or about $200 please contact me.

I was looking at something like this,
https://www.chell.co.uk/phpmedia/docs/c ... -sheet.pdf
But let me know if you have any better ideas.