Current images of fusor efforts, components, etc. Try to continuously update from your name, a current photo using edit function. Title post with your name once only. Change image and text as needed. See first posting for details.
2 posts • Page 1 of 1
- Mike Veldman
- Posts: 157
- Joined: Mon Aug 13, 2001 8:38 pm
- Real name: Mike Veldman
- Location: Stillwater, Oklahoma
These are some pictures of my current work in progress. This is just mocked up for the photos. This one is being created out of a pipe section I picked up at the recycling center a while back. The front view shows the shop made end piece and view port. The rear view shows the vacuum valve, sparkplug feedthrough, bleed valve and thermocouple. Another view is the entire chamber and also the inside of the backplate showing the grid and support. The final picture is the vacuum stand which is nearly complete for these deeper vacuum projects. The stand consists of a welch 1400 series fore pump, edwards diffusion pump with both water and forced air cooling, valving , gauging and column. This is built of pieces obtained here and there.
- vss2.jpg (31.47 KiB) Viewed 1039 times
- nfs17.jpg (27.67 KiB) Viewed 1039 times
- nfs16.jpg (27.04 KiB) Viewed 1039 times
- nfs15.jpg (22.69 KiB) Viewed 1039 times
- nfs14.jpg (28.69 KiB) Viewed 1039 times
I tried to contain myself, but I escaped.