TA DA New Use of Plasmas

This forum is for other possible methods for fusion such as Sonolumenescense, Cold Fusion, CANR/LENR or accelerator fusion. It should contain all theory, discussions and even construction and URLs related to "other than fusor, fusion".
Post Reply
John Futter
Posts: 1848
Joined: Wed Apr 21, 2004 10:29 pm
Real name: John Futter
Contact:

TA DA New Use of Plasmas

Post by John Futter »

It may not be the panacea to provide the World with limitless energy
BUT
You will live happily ever after if you get one ------aledgedly

https://www.resonantlight.com/perl-mplu ... gI_8_D_BwE



Where do these people come from ??????!!!!

and more importantly who are the silly suckers that buy this claptrap --maybe it cures them of silly mistakes who knows??
Jon Rosenstiel
Posts: 1494
Joined: Thu Jun 28, 2001 1:30 am
Real name: Jon Rosenstiel
Location: Southern California

Re: TA DA New Use of Plasmas

Post by Jon Rosenstiel »

Only a 30-foot range? Guess I’ll need to buy two or three for the house plus another for my lab!

Jon Rosenstiel
ian_krase
Posts: 636
Joined: Mon Nov 28, 2016 2:48 am
Real name: Ian Krase

Re: TA DA New Use of Plasmas

Post by ian_krase »

Well, that certainly managed to be absurd. At first I thought that inductively coupled plasma had made it into the beauty market.
User avatar
Mark Rowley
Posts: 909
Joined: Sun Dec 29, 2002 12:20 am
Real name: Mark Rowley
Location: Sacramento California
Contact:

Re: TA DA New Use of Plasmas

Post by Mark Rowley »

27.125 mHz is CB Channel 14, lol

Mark Rowley
User avatar
Richard Hull
Moderator
Posts: 14992
Joined: Fri Jun 15, 2001 9:44 am
Real name: Richard Hull

Re: TA DA New Use of Plasmas

Post by Richard Hull »

One born every minute and two to take him......

Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
ian_krase
Posts: 636
Joined: Mon Nov 28, 2016 2:48 am
Real name: Ian Krase

Re: TA DA New Use of Plasmas

Post by ian_krase »

It's also an ISM band, no?
User avatar
Bob Reite
Posts: 576
Joined: Sun Aug 25, 2013 9:03 pm
Real name: Bob Reite
Location: Wilkes Barre/Scranton area

Re: TA DA New Use of Plasmas

Post by Bob Reite »

27.12 MHz is the center of that ISM Band. Yes, shared with CB radio. CB radio is a secondary user, so must accept interference from ISM devices.
The more reactive the materials, the more spectacular the failures.
The testing isn't over until the prototype is destroyed.
User avatar
Mark Rowley
Posts: 909
Joined: Sun Dec 29, 2002 12:20 am
Real name: Mark Rowley
Location: Sacramento California
Contact:

Re: TA DA New Use of Plasmas

Post by Mark Rowley »

Bob, of course. But that wasn't the point. The whole thing is comical from A to Z. It's just fitting to see a quack device operating on a frequency known for having issues.

Mark Rowley
User avatar
Bob Reite
Posts: 576
Joined: Sun Aug 25, 2013 9:03 pm
Real name: Bob Reite
Location: Wilkes Barre/Scranton area

Re: TA DA New Use of Plasmas

Post by Bob Reite »

Seems that this should have been posted in some other section as it is not "another form of fusion". I wonder how long before the FDA shuts them down.
The more reactive the materials, the more spectacular the failures.
The testing isn't over until the prototype is destroyed.
ian_krase
Posts: 636
Joined: Mon Nov 28, 2016 2:48 am
Real name: Ian Krase

Re: TA DA New Use of Plasmas

Post by ian_krase »

Or the FCC.
User avatar
Bob Reite
Posts: 576
Joined: Sun Aug 25, 2013 9:03 pm
Real name: Bob Reite
Location: Wilkes Barre/Scranton area

Re: TA DA New Use of Plasmas

Post by Bob Reite »

As long as it's crystal controlled so it stays on 27.12 MHz and they keep the "garbage" from the plasma within the 326 kHZ bandwidth, the FCC won't care. Diathermy machines operate in this band.
The more reactive the materials, the more spectacular the failures.
The testing isn't over until the prototype is destroyed.
Post Reply

Return to “Other Forms of Fusion - Theory, Construction, Discussion, URLs”