Yes, I'm back to playing with my 8076 NIM again. Thanks to some docs
from someone, I'm a lot closer to getting it to work. I had previously
figured out how to control most of the settings, now I have that done, and
am able to get conversion data back from the unit. I'm curious if anyone
has any docs on the format of the data over the CAB. I'm going to connect
a pulser to the input and see if I can figure out the data format that way,
but some actual info would probably speed things up
8076 modules seem easier to find than 8075s. Once/if I get this working,
I'll release the software I'm writing for it. Very simple interface, runs under
DOS and you just need a parallel port and a simple cable. Next step may
be a simple PIC uC circuit so you can talk to it via USB, and then have
some nicer GUI software.
Any info on the Canberra Acquisition Bus ?
-
- Posts: 147
- Joined: Thu Jun 13, 2002 2:46 pm
- Real name:
- Contact:
Re: Any info on the Canberra Acquisition Bus ?
Look forward to that Chris
Re: Any info on the Canberra Acquisition Bus ?
What vintage is the 8076, Chris? Also, have you talked with Don Orie? He may have a manual, with I/O info.
Dave Cooper
Dave Cooper
Re: Any info on the Canberra Acquisition Bus ?
Where to find documentation to ADC 8076, I bought it, but the problem with the documentation ...
-
- Posts: 1848
- Joined: Wed Apr 21, 2004 10:29 pm
- Real name: John Futter
- Contact:
Re: Any info on the Canberra Acquisition Bus ?
Mitya
you should get your answer in 2023 if karma exists
Please do not bring old threads back to life
please read the forum rules and introduce yourself and supply your full real name in the required fields
you should get your answer in 2023 if karma exists
Please do not bring old threads back to life
please read the forum rules and introduce yourself and supply your full real name in the required fields