Hello,
I've been wanting to make a portable gamma spectrometer that can transmit either thru a 433MHz module or a Bluetooth Module for quite some time.
I have 3 × (9 by 9 by 30 mm CsI(Tl) ) crystals and will be using either a 3 x 3 mm or 6 × 6 SiPM per crystal (all of which will be powered by a temperature compensated power supply)
For right now I only plan on monitoring isotopes in the wind or possibly in the rain.
Do you think y'all can provide some ideas for this project?
433 MHz or Bluetooth gamma spectrometer
-
- Posts: 5
- Joined: Fri Oct 29, 2021 12:48 pm
- Real name: Cole Wilhite
-
- Posts: 1850
- Joined: Wed Apr 21, 2004 10:29 pm
- Real name: John Futter
- Contact:
Re: 433 MHz or Bluetooth gamma spectrometer
Cole
You might want to follow the board rules you signed up to and are presently ignoring
You might want to follow the board rules you signed up to and are presently ignoring
-
- Posts: 5
- Joined: Fri Oct 29, 2021 12:48 pm
- Real name: Cole Wilhite
-
- Posts: 5
- Joined: Fri Oct 29, 2021 12:48 pm
- Real name: Cole Wilhite
Re: 433 MHz or Bluetooth gamma spectrometer
To simplify what i'm trying to do is I'm trying to figure out how to take 3 photodiode (and reduce crosstalk between them), and then amplify and shape the signals to a decent enough quality for detection by the ADC and then the processor (a Arduino UNO) to send it to either a screen or a bluetooth module.