Page 1 of 1
Bubble Detector in Action / 45sec Video
Posted: Sat May 08, 2021 8:25 pm
by Mark Rowley
Decided to make a video of the fusor generating bubbles in my last operational BTI dosimeter. The run was around 3 minutes and the distance was about 13cm from the inner grid. Recording speed at 3x making the video about 45 seconds long.
No attempt at any accuracy here. It’s just closeup video exemplar of a BTI making bubbles.
https://youtu.be/Ncw0uGmHzCI
Mark Rowley
Re: Bubble Detector in Action / 45sec Video
Posted: Sun May 09, 2021 12:20 am
by Richard Hull
Nice video....Bubbling over with neutrons. Who says the watched pot never boils?!
Richard Hull
Re: Bubble Detector in Action / 45sec Video
Posted: Tue May 11, 2021 8:07 pm
by Jon Rosenstiel
Mark,
Love your video. You should place your microphone right next to the detector... if there’s not too much background noise we’d be able to hear the bubbles “pop” into existence.
Jon Rosenstiel
Re: Bubble Detector in Action / 45sec Video
Posted: Tue May 11, 2021 8:23 pm
by Mark Rowley
That would be cool! Unfortunately the replacement motor on the 1402 is a noisy beast. Still a lot quieter than the Yellowjacket but not quiet enough to her the bubbles pop into existence.
Mark Rowley