Need some help
Posted: Sun Jul 07, 2019 4:14 pm
Hey
Was directed to this forum for post for help with my fusion experiment.
Have a prototype built But need help getting a better vacuum and creating plasma at base of magnets to spin upto centre from both sides
Magnets have same pole facing centre to repelling.
So if plasma spins up to centre then plasma coming from other side will be spinning opposite direction
Here’s some link to other people’s work that helped with idea
https://youtu.be/2B-lKgcQJvg
And
https://youtu.be/uPU9cEK5YsM
As can see the magnetic field makes plasma spin around outside where field line are and with a fair bit of speed.
So idea is to use the kenetic force the magnetic fields give the plasma to in theorie line up plasma coming opposite way to collide somewhere in middle with enough force from magnetic spin to hopefully lower power requirement for fusion...
Hopefully have explained in a simple enough way to understand with pic of prototype and vids to help explain idea
I live in Melbourne Australia.
Any help locally would be great
But if someone understands what trying to do and has experience and equipment to help finish I could send prototype over to where ever.
But would be good to finish at my parents factory has workshop ect
Anyway
Hope someone can help
From Steven Whittam
Was directed to this forum for post for help with my fusion experiment.
Have a prototype built But need help getting a better vacuum and creating plasma at base of magnets to spin upto centre from both sides
Magnets have same pole facing centre to repelling.
So if plasma spins up to centre then plasma coming from other side will be spinning opposite direction
Here’s some link to other people’s work that helped with idea
https://youtu.be/2B-lKgcQJvg
And
https://youtu.be/uPU9cEK5YsM
As can see the magnetic field makes plasma spin around outside where field line are and with a fair bit of speed.
So idea is to use the kenetic force the magnetic fields give the plasma to in theorie line up plasma coming opposite way to collide somewhere in middle with enough force from magnetic spin to hopefully lower power requirement for fusion...
Hopefully have explained in a simple enough way to understand with pic of prototype and vids to help explain idea
I live in Melbourne Australia.
Any help locally would be great
But if someone understands what trying to do and has experience and equipment to help finish I could send prototype over to where ever.
But would be good to finish at my parents factory has workshop ect
Anyway
Hope someone can help
From Steven Whittam