Search found 65 matches

by Jake Wells
Sat Jul 06, 2019 7:21 pm
Forum: Fusor Construction & Operation (& FAQs)
Topic: BNC Thread Size
Replies: 6
Views: 4783

Re: BNC Thread Size

I understand that. Right now I just need to know what tap and die to use.
by Jake Wells
Sat Jul 06, 2019 4:52 pm
Forum: Fusor Construction & Operation (& FAQs)
Topic: BNC Thread Size
Replies: 6
Views: 4783

BNC Thread Size

I'm planning to make a BNC to conflat adapter for different probes I want to use within my chamber. I have a 2.75" conflat blank flange and standard panel mount BNC connectors laying around that I plan to use (https://www.americanradiosupply.com/75-ohm-bnc-bulkhead-coaxial-connector-bnc-3194-75/). I...
by Jake Wells
Sat Sep 24, 2016 5:58 pm
Forum: Images du Jour
Topic: Pictures of Fusor II and other projects
Replies: 4
Views: 2333

Re: Pictures of Fusor II and other projects

That is an absolutely gorgeous fusor. Good luck on the cyclotron!!!
by Jake Wells
Mon Sep 12, 2016 1:13 am
Forum: Fusor Construction & Operation (& FAQs)
Topic: Is a 2.75 in 6 way cross enough volume for fusion?
Replies: 2
Views: 1965

Re: Is a 2.75 in 6 way cross enough volume for fusion?

Yes. Many fusors on this forum have been built using a 4 way cross. A 6 way cross will do just fine.
by Jake Wells
Mon Aug 22, 2016 5:34 pm
Forum: High Voltage - Fusor Input Power (& FAQs)
Topic: xray transformer questions
Replies: 3
Views: 2814

Re: xray transformer questions

That is NOT an x Ray transformer. It's a low power filament transformer for the filament of the x Ray tube. They only have an output of around 4-8v
by Jake Wells
Fri Apr 03, 2015 4:20 am
Forum: High Voltage - Fusor Input Power (& FAQs)
Topic: 316L Stainless Wire vs 316 Stainless Wire
Replies: 1
Views: 1887

316L Stainless Wire vs 316 Stainless Wire

I hear that stainless steel is a good wire for fusor reactors.

http://www.mcmaster.com/#92705k17/=wl3e9d

My question is can 316L stainless steel wire work for a fusor?
by Jake Wells
Fri Apr 03, 2015 4:11 am
Forum: Vacuum Technology (& FAQs)
Topic: Conflat Orifice
Replies: 1
Views: 1119

Conflat Orifice

I am about to buy a orifice from Lenox Laser. There was a calcluator to Give me an exact size in which i want. http://www.lenoxlaser.com/index.php?dispatch=products.view&product_id=50 Inlet Pressure: 10 PSIG Outlet Pressure: .000001 torr Gas Type: 2.01 Hydrogen 2 Temperature: 22 degrees C Flow Rate:...
by Jake Wells
Fri Feb 13, 2015 12:48 pm
Forum: Vacuum Technology (& FAQs)
Topic: Used VCR Fitting
Replies: 2
Views: 1772

Used VCR Fitting

My previous discussion was on CF gaskets and how are they not reusable. Is it the same thing with VCR gaskets. Are VCR gaskets reusable with the indentation in them?

Image
by Jake Wells
Mon Dec 29, 2014 6:34 pm
Forum: Vacuum Technology (& FAQs)
Topic: Used Flange Gaskets
Replies: 6
Views: 2483

Re: Used Flange Gaskets

But i thought with tons of clamping cf flanges are very good at creating a seal?
by Jake Wells
Mon Dec 29, 2014 1:34 am
Forum: Vacuum Technology (& FAQs)
Topic: Used Flange Gaskets
Replies: 6
Views: 2483

Used Flange Gaskets

I have a 10 porthole chamber all with 2.75 cf flanges. The knife edge of the cf flange bites down on the gasket. Could used gaskets also work? I am concerned that the indentation in the gaskets might prevent the flanges from creating a seal. Could gaskets like these work even if they have an indenta...