Almost finish building prototype

It may be difficult to separate "theory" from "application," but let''s see if this helps facilitate the discussion.
Post Reply
steventw
Posts: 103
Joined: Fri Jan 24, 2014 8:45 am
Real name: Steven Whittam
Location: Melbourne/Australia

Almost finish building prototype

Post by steventw »

Finally was able to finish off prototype and buy a new vacuum chamber
Got 3 more wires to solder and find 2 jumper cables to earth it and can then run experiment.
I’ll try get a video when get working

From Steven
User avatar
Richard Hull
Moderator
Posts: 14992
Joined: Fri Jun 15, 2001 9:44 am
Real name: Richard Hull

Re: Almost finish building prototype

Post by Richard Hull »

This is in the wrong forum........ Construction maybe??
No fusion theory in your post and no general fusion theory.
Please re-post in the proper forum. I will erase this thread soon.

Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Post Reply

Return to “Fusor and/or General Fusion Theory (& FAQs)”