Diff pumps cleanout

Every fusor and fusion system seems to need a vacuum. This area is for detailed discussion of vacuum systems, materials, gauging, etc. related to fusor or fusion research.

Re: Diff pumps cleanout

Postby Dennis P Brown » Wed Sep 13, 2017 8:10 pm

The issue I have had with Indium is that it is single use. Has to be replace each time the components are dis-assembled. Also, steel expands a lot with temperature and Indium does not easily accommodate such expansions without being deformed in a permanent manner (when further compressed, it is going to have issues when the metal re-contracts) - that could be an issue for a diffusion pump that cycles. May not be an issue but do consider that.

Unless the issue is cryogenic mating surfaces or ultra-high vac (10^-7 and higher), I have no issues with low cost gaskets.
User avatar
Dennis P Brown
 
Posts: 1139
Joined: Sun May 20, 2012 2:46 pm
Location: Glen Arm, MD
Real name: Dennis P Brown

Re: Diff pumps cleanout

Postby ian_krase » Thu Sep 14, 2017 3:35 am

Isn't it also imminently remeltable though?
ian_krase
 
Posts: 256
Joined: Mon Nov 28, 2016 7:48 am
Real name: Ian Krase

Re: Diff pumps cleanout

Postby Jerry Biehler » Thu Sep 14, 2017 4:16 am

Yep, it is. Its very soft too, you can put dents into it with your fingernail.
Jerry Biehler
 
Posts: 692
Joined: Tue Nov 24, 2009 8:08 am
Location: Beaverton, OR
Real name:

Re: Diff pumps cleanout

Postby Richard Hull » Fri Sep 15, 2017 5:32 am

Indium is one of the softest of all the elements. I makes lead look like stainless steel. Some of the nasty metals like those on the extreme left of the chart might be softer but are unusable structurally or for most all purposes in the real world.

You can stand over a molten vat of indium, 153 deg C, with an inverted funnel and hose leading to your nose and snort th' stuff as it has, effectively, no vapor pressure until it gets near is monstrously high boiling point 2000 deg C.....3000+ deg F


You can write very nice, long, conductive paths on paper or wood with a stick of indium metal. I have had my hands turn silver handling the stuff. According to the "Rare Metals Handbook" there is no recorded case of industrial Indium heavy metals poisoning. As with many metals, there are rare instances recorded of contact dermititus with long term repeated handling.

Aluminum has far more industrial contact dermititus instances reported.

Indium is a fun metal, one of my favorites, and I have about 5 kilogams on hand.

Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
Retired now...Doing only what I want and not what I should...every day is a saturday.
User avatar
Richard Hull
Site Admin
 
Posts: 10358
Joined: Fri Jun 15, 2001 1:44 pm
Real name: Richard Hull

Previous

Return to Vacuum Technology (& FAQs)

Who is online

Users browsing this forum: Bing [Bot] and 1 guest