Search found 59 matches

by Ameen Aydan
Mon Jan 14, 2019 2:45 am
Forum: Images du Jour
Topic: Joe Gayo's Fusor
Replies: 20
Views: 617

Re: Joe Gayo's Fusor

Really nice setup man! You must have worked hard and long. I'm sure if you live close to a large city that there are calibration services or people on this form who are willing to calibrate with you. Good luck on your efforts, but judging how well this system is, I don't think your going to need it....
by Ameen Aydan
Fri Jan 11, 2019 3:49 am
Forum: Fusion --- Past, Present, and Future
Topic: Wendelstein 7-X has successfully finished its second major experimental run
Replies: 27
Views: 1975

Re: Wendelstein 7-X has successfully finished its second major experimental run

I think you guys interpreted what I said incorrectly. But I did give a bad explanation. I wasn't trying to say that there will be new technologies. I have seen how uranium is enriched and how D2O is made. They are both a very hard process. Rather than coming up with new technologies, we just make th...
by Ameen Aydan
Thu Jan 10, 2019 3:07 pm
Forum: Fusion --- Past, Present, and Future
Topic: Wendelstein 7-X has successfully finished its second major experimental run
Replies: 27
Views: 1975

Re: Wendelstein 7-X has successfully finished its second major experimental run

I had the opportunity to see one of the Canadian made CANDU reactors a long time ago here in Ontario. Now looking on the internet, I can find that this design is in fact a very desirable one. The only problem with this reactor is as you mentioned, the cost. They sold a couple reactors at first and l...
by Ameen Aydan
Wed Jan 09, 2019 1:52 am
Forum: Fusion --- Past, Present, and Future
Topic: Wendelstein 7-X has successfully finished its second major experimental run
Replies: 27
Views: 1975

Re: Wendelstein 7-X has successfully finished its second major experimental run

Hello again, As a follow up to the previous thread, I wanted to ask a simple question. How can we bring nuclear energy back? I thought that it could be done by teaching others through persuasive education to the public. An example is telling them the benefits and why nuclear is such a great solution...
by Ameen Aydan
Tue Jan 08, 2019 12:04 am
Forum: Vacuum Technology (& FAQs)
Topic: Cleaning/Repairing Edwards E2M5
Replies: 13
Views: 728

Re: Cleaning/Repairing Edwards E2M5

Hello Thank you all so much for your suggestions, I can't say enough thanks in a life time. I just took a look and will purchase it soon. Since I'm from Canada, the price of shipping is $16 dollars... So as soon as I get that all worked out I should be able to purchase it. I also purchased an MKS 90...
by Ameen Aydan
Thu Jan 03, 2019 11:50 pm
Forum: Vacuum Technology (& FAQs)
Topic: Cleaning/Repairing Edwards E2M5
Replies: 13
Views: 728

Re: Cleaning/Repairing Edwards E2M5

Hello all, Update: I managed to remove most of the crap. Thank you all for your recommendations. So I used all your guys advice. Here's what I did: 1. (This was before I even made the last post) I put a ton of WD-40 in the little place and let it sit there for a week. Most of it evaporated and becua...
by Ameen Aydan
Thu Jan 03, 2019 4:54 am
Forum: New User Chat Area
Topic: Single-Stage Vacuum Pump For Demo Fusor
Replies: 3
Views: 170

Re: Single-Stage Vacuum Pump For Demo Fusor

Oops! I meant to take the CFM part out. The save draft option can be confusing at times...
by Ameen Aydan
Thu Jan 03, 2019 3:42 am
Forum: Vacuum Technology (& FAQs)
Topic: Cleaning/Repairing Edwards E2M5
Replies: 13
Views: 728

Re: Cleaning/Repairing Edwards E2M5

Hello guys! Just back from new years and a really boring day! Who else did nothing all break? So, I have finally cleaned up everything and got those extra parts I needed. These being the pumps oil, some flushing fluid and the OIL TANK gasket. The flushing fluid cost $12 per litre, oil was $16 per li...
by Ameen Aydan
Thu Jan 03, 2019 1:17 am
Forum: New User Chat Area
Topic: Single-Stage Vacuum Pump For Demo Fusor
Replies: 3
Views: 170

Re: Single-Stage Vacuum Pump For Demo Fusor

Hello, Nice to see that you've chosen to join the forum. We just ask (as detailed in the beginning) that you introduce yourself first. For a demo fusor this pump will do just fine and should work to achieve your goal. But just looking at the specs, It seems very likely that the CFM would be so high....